ATEN CS1782 Manual do Utilizador descarregar pdf (Página 19)

Chapter 2. Hardware Setup

Chapter 2

Hardware Setup

Cable Connections

To set up your CS1782A / CS1784A installation, refer to the installation

diagram on the following page (the numbers in the diagrams correspond to the

steps, below), and do the following:

1. Plug your USB keyboard and USB mouse into the USB console ports

located on the unit’s rear panel.

2. Plug your console monitor into the DVI console port located in the unit’s

rear panel and power on the monitor.

3. Plug your main microphone and speakers into the console microphone and

speaker jacks located on the unit’s front panel. The microphone and

speakers plugged into this panel have priority over those in the rear panel.

4. Plug your secondary microphone and 2.1 / 7.1 speakers into the console

audio ports located on the unit’s rear panel.

4a. Plug one end of the 7.1 surround sound cable provided with the

package into the 7.1 channel audio ports on the CS1782

4b. Plug the other end of the 7.1 surround sound cable into the 7.1 channel

audio ports on your computer.

5. Using a KVM cable set (provided with this package), plug the DVI

connector into any available DVI socket in the KVM port section of the

switch, then plug the accompanying USB, microphone and speaker

connectors into their corresponding USB, microphone, and speaker

sockets.

1. Important safety information regarding the placement of this

device is provided on page 37. Please review it before

proceeding.

2. Make sure that power to all the devices you will be installing has

been turned off. You must unplug the power cords of any

computers that have the Keyboard Power On function.

cs1782a-1784a.book Page 11 Friday, August 27, 2010 11:37 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Sem comentários

ATEN CS1782 Manual do Utilizador Página 19